Vertical gardening has become very popular lately as its focus on growing plants vertically rather than horizontally makes the space they take up much smaller. However, creating a vertical garden is much more complicated compared to a normal garden.
Looking for the best drip irrigation system in Australia? We’ve reviewed top 4 irrigation systems for you to select from.
Vertically grown gardens require special attention to nutrients, water, and temperature control. They also need to be watered at specific times during the day, unlike horizontal vegetable gardens, where you get to choose whenever you want to water them.
Creating a vertical garden requires some knowledge to ensure that the plant gets enough light, moisture, and fertilizer. This article shows you exactly how to set up a drip irrigation system for a vertical garden in minutes.
Continue reading below to learn everything you need to know about vertical drip irrigation systems.
Can you run drip irrigation vertically?
Yes! Drip irrigation can be used to grow vegetables vertically because it allows you to apply water directly to the roots of your plants. 
You don’t have to worry about the soil getting less wet when using drip irrigation because it only delivers water to the top few inches of soil. It doesn’t spread out through the entire depth of the pot or container.
This means that you will not have to use any additional fertilizers or additives to make sure that your plants are healthy.
How do you install drip irrigation in a vertical garden?
Installing drip irrigation in a vertical vegetable garden is quite simple. You just need to follow these steps:
1. Choose the right type of drip irrigation kit for your needs. There are many different types available today. Make sure that you pick one that suits your needs.
2. Determine the location of each valve. The valves should be placed near the base of the pots so that they can deliver water to the root zone of the plant.
3. Connect the valves to the main line. Each valve should connect to the main line with a tee fitting.
4. Install the emitters. These are small tubes that direct the water from the main line into the pots.
5. Place the pots in the containers.
6. Fill the containers with water until the level reaches the bottom of the pots.
7. Add the fertilizer if needed.
That’s it; that’s all you need to do to install a drip irrigation system in your vertical garden.
How do you water a wall garden?
Watering a wall garden is similar to watering a regular garden. All you need to do is place the hose over the edge of the pot and let the water flow down to the roots. Or you can use a drip irrigation system.
If you decide to go with a drip irrigation system, then you will need to determine the locations of the emitters first. Then, you will need to connect the emitters to the main line.
Once this is done, you can fill the pots with water and wait for the water to reach the bottom of the pots before adding the fertilizer.
What kind of fertilizer should I add to my wall garden?
Fertilizing a wall garden is very important. If you don’t fertilize your plants regularly, they won’t grow well.
The best way to fertilize your plants is by applying liquid fertilizer. However, you can also use dry fertilizer as long as you mix it with water.
Liquid fertilizer contains both nitrogen and phosphorus, which are essential for growing plants. Dry fertilizer has nitrogen but lacks phosphorus.
When mixing dry fertilizer with water, you should always start with half the amount of dry fertilizer and half the amount of water. This ratio will ensure that you get enough nutrients while keeping the mixture moist.
How often should I fertilize my wall garden?
It depends on how much sunlight your plants receive. Plants that receive more light require more frequent fertilization than those that receive less light. 
For example, tomatoes need to be fertilized every two weeks. On the other hand, peppers need to be fertilized once every three months.
You can check the growth of your plants by looking at their leaves. If you see yellowish spots on them, then you know that they need some extra nutrition.
How do I maintain my wall garden?
Maintaining a wall garden is easy. You just have to make sure that you keep an eye out for pests such as aphids, slugs, or snails.
To prevent these pests from harming your plants, spray insecticides around the edges of the pots.
Also, remove weeds and dead plants from time to time.
A vertical garden is one of the most effective ways to bring greenery indoors. It allows you to enjoy growing fresh vegetables inside.
However, installing a vertical garden requires a lot of work. That’s why many people choose not to bother doing it. But there are still plenty of benefits to having a vertical garden in your home.
I hope this article helped you understand how to set up a drip irrigation system for your vertical garden at home. If you have any questions or suggestions, don’t hesitate to leave a comment in the section below.